Policy and compliance for aluminum into and out of Korea
The two policy regimes that decide landed cost and paperwork for Korean flat-rolled aluminum: US Section 232 and the EU Carbon Border Adjustment Mechanism, as they stand after the 2026 changes.
What this page covers
Written for commercial and procurement staff, not customs counsel. Every figure links to its primary source.
Two policy regimes decide the landed cost and the paperwork for most Korean flat-rolled aluminum moving to its two largest overseas destinations: the United States under Section 232, and the European Union under the Carbon Border Adjustment Mechanism. Both changed materially in 2026. This page explains the current rules in plain terms, states what they mean for a Korean mill, a Korean exporter, and an overseas buyer, and lists the documents each party should have ready.
Inquivix Technologies coordinates the documentation side of aluminum orders between Korean mills and international buyers. We do not provide customs or legal advice; we make sure the right documents exist and agree with each other before a shipment moves.
United States: Section 232 on aluminum
Raised and restructured three times since early 2025. Older summaries still circulate; the sequence below is current.
Where the rate stands today
- June 2025. A presidential proclamation raised the Section 232 rate on steel and aluminum articles and their derivative products from 25 percent to 50 percent, effective June 4, 2025, for all countries except the United Kingdom, which stayed at 25 percent.
- April 2026. Proclamation 11021 of April 2, 2026, effective April 6, 2026, restructured how the tariff is calculated. The duty now applies to the full customs value of a covered article rather than only to the value of its metal content. Articles made entirely or almost entirely of aluminum, which includes aluminum sheet and coil, carry a flat 50 percent on full value. Derivative articles substantially made of aluminum, steel, or copper carry 25 percent on full value. A temporary 15 percent tier applies to certain industrial machinery and power equipment, and a 10 percent tier applies to articles in any of the covered annexes whose metal content is of US origin. Articles whose combined aluminum, steel, and copper content is below 15 percent by weight are excluded from the metals tariffs; the proclamation text and the White House fact sheet differ on whether exactly 15 percent is in or out, so treat 15 percent as a line to stay clearly below. The proclamation also ended the stacking of multiple metals tariffs on one article and terminated the derivatives inclusion process.
- June 2026. Proclamation 11032 of June 1, 2026, effective June 8, 2026 and in force through December 31, 2027 unless modified, added aluminum lithographic plates and steel racks to the derivative list, expanded the temporary 15 percent tier to agricultural equipment and certain residential HVAC products, and lowered the US-origin metal content threshold for the reduced rate from 95 percent to 85 percent.
- July 2026. A further aluminum proclamation created an incentive program under which approved US primary aluminum projects may import primary aluminum at half the otherwise applicable Section 232 rate, in quantities tied to the project's anticipated output.
Separately, Russian aluminum and products containing Russian primary aluminum remain subject to an additional 200 percent duty under Proclamation 10522, on top of the applicable rate.
What this means for Korean flat-rolled aluminum
Korean coil, sheet, plate, and foil are classified in HTS Chapter 76 and fall in the 50 percent full-value tier. There is no Korea-specific exemption, quota, or reduced rate under the current proclamations.
- Landed cost is the comparison, not mill price. A US buyer now compares Korean mill price plus freight plus 50 percent of customs value against domestic supply and against other origins subject to the same rate. Korea's advantage, where it exists, comes from alloy and temper capability, certification, consistency, and lead time, not from the tariff line.
- Customs value is the base. Because the duty applies to full customs value, the Incoterm and the declared value matter more than before. FOB and CIF declarations produce different duty amounts on the same coil. Buyers should model both before choosing terms.
- Derivative products are a separate calculation. A Korean exporter shipping a finished article that contains aluminum, rather than aluminum itself, needs the HTS classification settled first. The article may fall in the 25 percent tier, the 15 percent temporary tier, or outside the metals tariffs entirely if its metal content is below 15 percent by weight.
- US-origin metal content changes the rate. A derivative article made abroad from US-smelted and US-cast aluminum qualifies for the 10 percent tier if at least 85 percent of its metal content is US origin. This is rarely relevant to Korean mill product, but it is relevant to Korean fabricators who can source US metal.
- Third-country demand has shifted. Korean supply that previously went to the US is now offered to buyers in Southeast Asia, India, the Middle East, and Europe. For those buyers, 2026 is a better year to qualify a Korean source than 2024 was.
Documents for a US-bound aluminum shipment
- Commercial invoice with a customs value that matches the contract terms and Incoterm
- HTS classification confirmed by the importer's broker before shipment, with the Section 232 Chapter 99 subheading identified
- Mill test certificate showing alloy, temper, and chemistry, which supports the classification
- Certificate of origin and, where applicable, a smelt and cast country declaration for the primary aluminum
- For derivative articles, a metal content statement by weight, supporting the 15 percent de minimis test or the tier assignment
- For articles claiming the US-origin metal tier, documentation of the US smelting and casting of the metal content
European Union: CBAM in its definitive period
Reporting-only from October 2023 to December 2025. Definitive regime from January 1, 2026, as amended by the Omnibus simplification, Regulation (EU) 2025/2083.
What CBAM is and where it stands
The Carbon Border Adjustment Mechanism puts a carbon price on the embedded emissions of certain goods imported into the EU, including aluminum, so that imported metal carries a cost comparable to EU-produced metal under the EU Emissions Trading System. The current rules, as they apply to an EU importer of aluminum:
- Threshold. An importer whose total annual net imports of CBAM goods (iron and steel, aluminum, cement, fertilisers) stay at or below 50 tonnes is exempt from authorisation, declaration, and certificate obligations. The threshold is cumulative per importer per calendar year; if it is crossed at any point, all of that year's imports fall in scope. It replaced the earlier 150 euro per consignment exemption. Electricity and hydrogen are outside the threshold.
- Authorisation. Importers above the threshold must be authorised CBAM declarants. Applications were due by March 31, 2026; an importer that applied on time may keep importing while the application is pending.
- Declaration and surrender. The annual CBAM declaration and the surrender of certificates are due by September 30 of the year following the import year. The first declaration, covering 2026 imports, is due September 30, 2027. This replaced the original May 31 deadline.
- Certificates. No certificates were sold in 2026. Sales begin February 1, 2027, covering 2026 imports. For 2026 imports the certificate price is the quarterly average of EU ETS allowance auction prices for the quarter of import; from 2027 it tracks weekly averages. From 2027 declarants must hold certificates covering at least 50 percent of the embedded emissions of each quarter's imports.
- Emissions data. Declarants report actual embedded emissions, verified by an accredited verifier, or use Commission default values. For aluminum, the definitive period covers direct emissions only; the Commission has said it does not intend to add indirect emissions from electricity for steel and aluminum in the near term, although the Regulation keeps a review clause. Under the August 2026 aluminium guidance, scrap input, pre-consumer or post-consumer, is treated as a raw material with zero embedded emissions, and the pre-consumer scrap share is reported as a parameter. The December 2025 proposal would change the treatment of pre-consumer scrap from 2028; it is not yet law.
- Carbon price paid at origin. A carbon price effectively paid in the country of production can be deducted from the certificates due. Korea operates a national emissions trading system, so this deduction is available where the Korean producer can document the price paid.
- Scope expansion. In December 2025 the Commission proposed extending CBAM from 2028 to downstream products that are intensive in steel and aluminum. Finished aluminum articles that are outside scope today may be inside it from 2028.
- Guidance. In August 2026 the Commission published ten guidance documents for non-EU operators covering monitoring, reporting, and the compliance cycle in the definitive period.
What this means for a Korean mill and its EU buyer
- The buyer carries the obligation; the mill carries the data burden. The EU importer is the declarant and pays for certificates. It can only declare actual emissions, which are usually lower than default values, if the Korean mill supplies verifiable product-level emissions data in the Commission's format. A mill that cannot supply it leaves its buyer paying on default values, which is a commercial disadvantage against mills that can.
- 2026 imports already cost money, paid in 2027. An EU buyer importing Korean coil in 2026 incurs certificate liability now and settles it by September 30, 2027. Buyers are provisioning for it, and some are writing it into price negotiations with the mill.
- Recycled content changes the number. Aluminum produced with a high share of scrap carries lower embedded emissions than primary-based product. Korean mills with documented scrap input have a direct cost advantage for EU buyers, provided the scrap share is in the verified data. Note that this advantage comes from scrap carrying zero embedded emissions under the current rules, which is also why the 2028 proposal on pre-consumer scrap is worth watching.
- K-ETS matters. Where a Korean producer has paid a carbon price under Korea's trading system, that price reduces the EU certificate requirement. The documentation of what was paid, and on which production, is part of the data package.
- Verification is the bottleneck. Actual emissions must be verified by an accredited verifier. Korean mills that have not yet engaged one should start before their EU buyers' 2027 declaration cycle, not after.
Documents for an EU-bound aluminum shipment
- Commercial invoice, packing list, and bill of lading, with CN codes that match the CBAM goods list
- Mill test certificate with alloy, temper, and chemistry
- Embedded emissions data per product in the Commission's definitive-period format: direct emissions per tonne, production route, scrap share, and the installation identifier
- Verification statement from an accredited verifier for the reported emissions, or a written confirmation that default values will be used
- Evidence of any carbon price effectively paid in Korea on the production in question
- The importer's authorised CBAM declarant number, which the exporter should record on its own file
How Inquivix Technologies handles compliance on an aluminum order
We are not a customs broker or a verifier, and we do not replace either.
Specify the destination at inquiry stage
Country, intended use, and whether the buyer is importing metal or a derivative article. This decides which rule set applies and which documents the mill has to produce.
Check the document set before shipment
Invoice, packing list, mill certificate, origin certificate, and inspection report are checked against each other and against the contract. Inconsistent weights, alloys, or values are the most common cause of a customs hold.
Coordinate the CBAM data request
For EU buyers we put the buyer's declarant and the mill's quality and environmental staff in the same thread, with the data template agreed up front, so the emissions figures arrive with the first shipment rather than after it.
Flag classification questions early
When a product sits near a tariff boundary, such as a derivative article close to the 15 percent metal content line, we tell both sides to settle classification with the importer's broker before price is agreed.
Keep the record
Every shipment's document set is retained so a later audit, on either side, can be answered from file.
Frequently asked questions
Is there a Korea exemption from the 50 percent Section 232 tariff?
No. The reduced tiers under the current proclamations are the 15 percent temporary tier for listed machinery and equipment categories (which the United Kingdom also receives on its derivative articles), and the 10 percent tier for articles whose metal is of US origin. Neither applies to Korean mill product in Chapter 76, which pays 50 percent on full customs value.
Does the 50 percent apply to the metal only or to the whole invoice?
Since April 6, 2026, to the full customs value of the covered article.
My EU company imports 30 tonnes of Korean coil a year. Does CBAM apply?
Not while total annual net imports of all CBAM goods stay at or below 50 tonnes. If any import in the year takes the cumulative total over 50 tonnes, all of that year's imports fall in scope.
When is the first CBAM payment actually due?
Certificates go on sale February 1, 2027. The first declaration and surrender, covering 2026 imports, is due September 30, 2027.
Can a Korean mill's carbon cost under K-ETS be credited?
Yes, where the price effectively paid can be documented for the production concerned. The deduction is claimed by the EU declarant.
Will finished aluminum products be covered by CBAM?
The Commission has proposed extending scope to steel- and aluminum-intensive downstream products from 2028. The proposal was not yet adopted as of this page's last review.
Have a specification or a sourcing question? Tell us the product, alloy, quantity, and direction.
Discuss your requirement