The 1050 aluminum alloy is from the 1xxx alloy group, which is used heavily by the electrical and chemical industries for being a commercially pure wrought family of aluminum alloys. The minimum 99.5% aluminum composition means that 1050 aluminum exhibits low mechanical strength compared to much more significantly alloyed metals from other groups. However, it also has excellent corrosion resistance and high plasticity than many other alloys.
Inquivix Technologies can provide high-quality and cost-effective 1050 aluminum coil manufactured to your exact specifications of gauge, width, and tempered grade, plus any other special requirements you may have. While it cannot undergo heat treatment, cold working can be used to achieve a more moderate strength needed for certain applications and the surface of 1050 aluminum coil can be polished to obtain the desired look for its end products.
1050 Aluminum Coil Applications

Chemical Industrial Containers

Aluminum Foil For Secondary Batteries

Heat Sinks

Architectural Flashings
Material Properties Of 1050 Aluminum Alloy
Chemical Composition Of 1050 Aluminum Alloy

Element | Percentage By Weight |
Aluminum (Al) | 99.5% |
Iron (Fe) | 0 – 0.4% |
Silicon (Si) | 0 – 0.25% |
Copper (Cu) | 0 – 0.05% |
Magnesium (Mg) | 0 – 0.05% |
Manganese (Mn) | 0 – 0.05% |
Zinc (Zn) | 0 – 0.05% |
Other | 0 – 0.15% |
Technical Specifications of 1050 Aluminum Alloy
Width (mm) | 40 – 2650 |
Thickness (mm) | 0.1 – 8.0 |
Length | As Required |
Tempered State | O, H12, H14, H16, H18, H19, H22, H24 |

Other Aluminum Coil Alloys

3003 Aluminum Coil

8081 Aluminum Coil
FAQs
1050 aluminum is an alloy from the pure aluminum series of 1xxx which has an aluminum composition close to 99%. This means it is lower in strength but more resistant to corrosion than other alloy types. It also has high conductivity both electrically, and thermally. 1050 aluminum is very workable and its surface can be prepared easily for decorative or functional requirements.
1050 aluminum coil can be used to manufacture industrial chemical handling equipment, heat sinks, architectural flashing applications, signage, components in electric appliances, cable sheathing, and secondary battery components.